Blackvue R-100 Main Unit
Reversing Camera System without LCD screen
The R100 Rearview Kit is the brand new addition to the BlackVue range. This fantastic kit comes with a control module that goes between the front and rear cameras of any DR650s-2CH system, and then outputs the video to the optional 7 inch display, or to an RCA input source such as your factory fitted navigation screen or aftermarket head unit. The rearview display can be configured to come on automatically (and only) when the vehicle is in reverse gear, or it can be set to display the rear feed the whole time.
Connects to your BlackVue’s rear camera and a display. Ideal for large vehicles and trucks fitted with BlackVue. Enjoy superior image quality and night vision when used in combination with the DR650s-2CH TRUCK.
The new BlackVue accessory that is now in stock lets you view the rear video feed live from your DR650s-2CH (or DR650s-2CH-TRUCK) dashcam on the screen of your choice! Increase your safety by using a built-in OEM display (in-dash), or aftermarket screen to see what is behind you while you are backing up!
This control module sits in-line between the BlackVue DR650s-2CH front and rear cameras. On the wire harness, there is an RCA output that allows you to send the live stream from the BlackVue rear camera to any device that will accept an RCA video input.
You can set up the control module to integrate with your vehicle (by getting the reverse signal) so that the rear video will come on automatically when the vehicle is backing up, or it can be configured in such a way that it will display the feed from the rear camera all the time on your screen. Either way, just like if the R-100 was not present,video from the rear camera is still always being stored to the memory card in case of an incident or accident. This is one of the best benefits of this setup and BlackVue dashcams in general: constant protection!
The R-100 can also act as a repeater, in those installations or vehicles such as tractor trailers or Class A RV’s where the rear camera must be mounted farther away from the front unit than is typical.
OEM equipment from PittaSoft BlackVue. Professional installation is highly recommended.
- Allows for DR650s-2CH series rear view camera feed to be displayed live
(internal or external Blackvue Cameras)
- Can be configured to display rear feed automatically when reversing
- Video button to manually trigger rear video feed
- RCA Output for other video display
- Input Power: 12-24V DC
- Size: 98 x 57 x 15mm (3.8″L x 2.2″W 0.59″H)
- Operating temperature: from -20°C to 60°C (-4°F to 140°F)
- Storage temperature: from -20°C to 70°C (-4°F to 158°F)